+7 (495) 223-22-05

CORDON-10 Video Transmission System

Description
Product Numbers
Description

The system is designed for real-time transmission of video, audio and telemetry data via a digital wireless link with COFDM modulation.

The system is specially developed for use in small-sized machine vision systems.

FEATURES

  • COFDM modulation
  • Data transmission via telemetry wireless link with a speed of up to 115kbit/s simultaneously with the video stream
  • Ability to switch frequency channels
  • Programming of operating modes
  • Support of analog CVBS and digital video cameras by video transmitter
  • Video transmitter compatibility with HDMI action cameras (Full HD 1920x1080)
  • Jointly use of video transmitter and video cameras with 5 or 9V supply voltage (by means of Binder series connector), for example, RIBBON line video cameras produced by SET-1
  • Ability to connect analog and digital HDMI monitors to the video receiver
  • Recording of audio and video information to the video receiver (microSD memory card up to 32GB)
  • Extended range of supply voltage 918V
  • Controlled output power up to 4000mW
  • Wide temperature range from -50 to +60 C
  • Compact dimensions
  • User-friendly operation

    COFDM modulation provides high image stability under difficult signal propagation conditions: for multi-path propagation and signal fading, in motion, under non line-of-sight and urban conditions.

    The system is equipped with flexible procedure of parameters setting allowing to increase wireless operating range, adjust the quality of the video image, the signal delay. Due to optimally customized system setting it is possible, for example, to activate the ultra-narrowband operating mode and without increasing the transmitters output power get enlarged by several times wireless operating range and provide possibility for simultaneous operation of several video transmitters in the narrow frequency band.

    Video transmitter and video receiver have the ability to connect with an external CORDON Tx / Rx Programmer, which allows switching of the frequency channels and loading in the field conditions of pre-programmed configurations without using a computer.

    The H.264 video compression format allows to have high resolution video transmission with minimal delay.

    The video transmitter is designed for jointly operation with various antennas types of corresponding frequency band, including customized according to a client requirements.

    BASIC PROGRAMMABLE PARAMETERS

  • Operating frequency
  • Output power
  • Bandwidth of the transmission signal
  • Modulation parameters
  • Video signal compression type
  • The number of frames transmitted per second
  • Audio path processing and encoding parameters
  • Setting of 5 or 9V voltage for analog video cameras power supply
  • Product Numbers

    CORDON-10 Video Transmission System

    464512.141

    Video Transmitter CORDON Tx10

    464512.154

    Video Receiver CORDON Rx10

    464512.155
    SPECIFICATIONS

    Digital Wireless Link With COFDM Modulation

    Frequency band 
    10501300MHz
    Output power
    1004000mW
    Modulation
    QPSK, 16QAM, 64QAM
    Band
    2, 2.5, 3, 4, 5, 6, 7, 8MHz
    Error correction  1/2, 2/3, 3/4, 5/6, 7/8
    Encryption interval
    1/4, 1/8, 1/16, 1/32
    Sensitivity 
    from -104 to -80dB
    Data encryption (optional)
    band encryption, AES-128 key + RF key 8-digit HEX number

    Video

    Video compression standard
    H.264
    Frame rate
    25fps
    Resolution
    max 19201080 (Full HD)
    Video delay (depends on operating mode)
    150-300ms
    Transmitter
    analog input CVBS or HDMI
    Receiver
    analog output CVBS or HDMI

    Audio

    Stereo line in/out or HDMI
    Encryption
    AAC or MPEG

    Telemetry

    Interface
    RS-232
    Data transmitting speed 
    115.200kbit/s

    Control

    Interface
    RS-232

    Power supply

    Transmitter
    external DC 9 18V, power consumption 8.4 24W (depends on output power and operating mode)
    Receiver
    external DC 9 18V, power consumption 8W

    Service conditions

    Operating temperature 
    from -40 to +60